How to Setup Netgear Orbi AX6000 & Troubleshoot Common Error

Do you have a Netgear Orbi AX6000 mesh network device? Desire to set it up to enjoy seamless internet connectivity. Don’t know how to proceed. No worries this article is specially meant to provide a detailed guide on Netgear Orbi AX6000 Setup. In addition to the setup information, you will also find the steps to troubleshoot common errors including Orbi Flashing White Light issue. So, read the further section very carefully.

Netgear Orbi AX6000 Setup Complete Information

You can easily setup your orbi mesh device with the below given Netgear Orbi AX6000 Setup steps:

Connect Router With Modem

To begin the setup, the first step of the process is to connect the router with the modem. You may use an ethernet cable to establish the connection. Check out the detailed steps to follow for the connection:

• First of all plug out your router from the power outlet to turn off the power.
• Thereafter take an ethernet cable and insert its one end in the router’s ethernet port.
• Connect the other end of the same ethernet cable to the ethernet port of the modem.
• Now plug-in back your modem device to the power outlet.
• Thereafter plug-in router device to power as well.
• Verify your orbi device is turned on properly or not. In case the power is not turned on, check the power cable & power outlet as well.

Place Orbi Satellites & Sync With Orbi Router

Secondly you have to place orbi router. To proceed with this step of Netgear Orbi AX6000 Setup you should follow the given steps:

• Locate a place to keep the device closer to a power outlet.
• Keep your orbi satellite within the range of orbi router devices.
• Orbi satellite LED will help you in finding an adequate location.
• Once the location is decided, you can proceed to Sync the satellite with the orbi router.
• Power up the device by connecting the adapter to the orbi satellite and power outlet.
• The LED starts, if it turns magenta then you need to place the device a bit closer to the router.
• In case the LED displays blue or amber color then the device location is adequate.

Connect To The Network

Now take a computer/ laptop/ mobile device and connect it with the orbi’s network. To establish connection you can use ethernet cable or WiFi settings for wireless connection.

Configure Orbi AX6000

Once connection between the devices is established successfully you can proceed to complete Netgear Orbi AX6000 Setup. Use a web or app to configure your orbi network. Choose any of the methods to do the setup as per your convenience. To begin with app based setup you should install the orbi app from google play store or app store. You may start setting up your orbi device using a web based method by browsing orbilogin.com. Login to the admin account and then complete the setup as guided on the screen.

How To Troubleshoot Common Errors

You can troubleshoot the common errors with Netgear Orbi AX6000 Setup. These errors include Orbi Flashing White Light, no internet, slow internet etc.

• First of all, check out the internet connection directly from your modem. In case there is an error with the modem’s network then you need to call ISP for a solution.
• Secondly try restarting your orbi device. Restarting may resolve temporary errors that may cause Orbi Flashing White Light.
• Thereafter you can check for firmware updates. Sometimes outdated firmware may cause errors. Resolve them by running the update if left.
• Factory resetting your device is the last step you can proceed with. Resetting will remove all the changes you have made in the device settings and restore the default settings.