How To Easily Complete Netgear Orbi Setup Process?
Finally switched from the traditional routers to the one with mesh technology which is Orbi? If yes, then to unlock all its features, you must definitely be in a search for the quick yet accurate Netgear Orbi setup guide. So in this blog-post we’ll be helping you with the same by listing the step by step guidance. The setup process is easy. You won’t require assistance from any tech expert. Moreover it won’t consume much of your time. So with no further stalling, let’s first collect all the setup components.
What You Need For The Setup?
For Netgear Orbi setup the requirements are very basic. You’ll easily find them right at your place. These are:
- A modem.
- Active internet connection.
- An Ethernet wire.
- A smart device.
- Next up, an electrical switch board.
- Access to a web browser.
- Lastly, the Orbi router and its power wire.
Start The Setup
Start the Netgear Orbi setup process by locating the right placement spot for the device. For best results, keep it in the middle of your abode, in an open space that offers ventilation. Do not hide it behind any object like curtains or inside any box. For effective signal transmission choose an elevated spot like table top. Also keep the router far from electronic and metal items. Now as you finalize the placement, you can move ahead with the installation.
✓ Physical Setup
First do you have any other router apart from Orbi? If yes, then disconnect it from the modem. Thereafter reboot the modem for a fresh setup. Now you can start with the physical setup.
For this take the ethernet wire. Plug it into the modem. Then move its other side into the Orbi. Now you can activate the Orbi. The Orbi router doesn’t get ready for the further configuration immediately. Rather it takes around five minutes to finish its booting process. So as you see the indicator turning steady white, you can move towards the next Netgear Orbi setup step.
✓ Connect Devices
In this step you need your smart device. To pair this device with the Orbi, you have two options. The first is wireless and the other one is wired. So for wireless pairing, activate the wifi of your device. Connect to the wireless network that is written on the base of Orbi. Whereas for wired pairing you just need to use the ethernet wire.
✓ Login
After successful pairing, the next step towards Netgear Orbi setup is that of login. So for this on the paired device open internet browser. It must be compatible and shouldn’t have pending updates. The compatible options are internet explorer, chrome, firefox, safari and edge. Now depending on the model of your Orbi, if its new then in the URL column type:
- orbilogin.local or
- http://10.168.168.1
Whereas if the model is older then you can use:
After you fill in the address and tap on Enter, the welcome page opens up.
✓ Completing Netgear Orbi Setup
On the welcome page, you’ll get an option of Next. Tap on it. Read terms of use. After agreeing again, hit Enter. Now the Orbi will detect the internet connection. As it does, click Next. Now if you have additional satellites. Place them at different locations but within the range of the router and then power them on. Confirm the activation by clicking Next on the interface. Now the admin page will open up. So create the password. Choose two questions and answer them for security purposes. Thereafter tap on Next. With this the wifi page opens up. Personalize the details for your Orbi network. Click on Next. Now pair the device with the Orbi using the new details that you just created. Once the device gets connected, confirm the same by tapping on “Connected to it”. With this the Netgear Orbi setup completes.
